Panasonic Projector PT-DW10000E

Full-HD DLP™ system projector with 10,000 lumens of brightness

Panasonic PT-DW10000E projector

Clear, bright projection of detailed HD images

  • Full high definition — 1,080 pixels x 1,920 pixels
  • High brightness — 10,000-lumen
  • High contrast ratio — 5,000:1

The PT-DW10000E is a full high-definition projector that can faithfully display HD content. High brightness is assured by a four lamp system that delivers 10,000 lumens, while dynamic iris technology achieves an outstanding 5,000:1 contrast ratio. Three-chip DLP™ technology provides excellent resistance to deterioration due to aging, making the DW10000E an extremely reliable system projector.

PT-DW10000E Projector Models
Model Number Description Price*
PT-DW10000E PT-DW10000E 10,000 ANSI 16:9 Full HD Projector (No Lens) £31,495.00

 

PT-DW10000E Projector Accessories
Part Number Description Price*
ET-LAD10000 Replacement lamp unit (single) £374.06
ET-LAD10000F Replacement lamp unit (four pack) £1161.12
ET-SFD100 Smoke Cut Filter £333.60
ET-PFD100 Frame £2364.00
ET-PKD100H
High-ceiling mount bracket £675.60
ET-PKD100S Low ceiling mount bracket £422.40
ET-HAD100 Carrying Handle £464.40
ET-D75LE6 Zoom lens (0.9 –1.1:1) £7293.30
ET-D75LE1 Zoom lens (1.5–2.0:1) £3795.00
ET-D75LE2 Zoom lens (2.0–3.0:1) £2872.70
ET-D75LE3 Zoom lens (3.0–5.0:1) £2872.70
ET-D75LE4 Zoom lens (5.0–8.0:1) £3795.00
ET-D75LE8 Zoom lens (8.0 –15.0:1) £8858.45
ET-D75LE5 Fixed focal length lens (0.8:1) £5316.45
ET-MD77SD1 SD-SDI Input signal board *1 £1310.98
ET-MD77SD3 HD/SD Input signal board *1 £3727.62
ET-MD77DV DVI-D Input signal board *1 £1310.98
ET-MD100SD4 Dual link HD-SDI Input signal board £3727.62

*Please note all prices shown are exclusive of VAT
*1 The LAN terminal on each board, when mounted, cannot be used because the LAN terminal on the main unit has priority.

Minimal downtime, high efficiency, and a bright picture.

Multi-Lamp Optical System - With Panasonic's original four lamp system, the PT-DW10000E generates 10,000-lumen brightness. If one lamp burns out during operation, the remaining lamps provide plenty of light to continue projecting. A lamp relay mode is also included. Extended, continuous operation is possible by lamp mode selection.

Provides 2,000 hours of use without filter maintenance.

Auto Cleaning Robot (ACR) - The PT-D10000E is the world's first*1 projector with an automatic filter cleaning system. When you switch on the projector, the air filter operates and the brush of the auto cleaning "robot" removes dust from the filter. This prevents the clogging that results in malfunctions and other problems. *1 As of March 2007

Dramatically reduced size, weight and volume.

Panasonic's new liquid-cooling system made it possible to significantly downsize the PT-DW10000E, making it one of the most compact in its class. The size is 30% smaller than the previous model*, and the weight and volume are 70% less than the previous model*. The PT-DW10000E also offers flexible installation and is easy to operate. * PT-D9510/PT-D9610

High Reliability

New cooling structure - In order to further enhance the cooling efficiency, Panasonic completely revised the placement of various internal components and combined this with their popular cooling system to enable use in temperatures up to 45°C. This allows use in a wider variety of environments, and keeps the operation more stable even in harsh conditions.

Liquid-cooling system - Panasonic's original liquid-cooling system directly cools the DLP™ chips, which extends the PT-DW10000E's performance and attains a high level of reliability.

Web browser control/monitoring and e-mail message alert - Anybody can operate the PT-DW10000E by remote control or monitor its status over a LAN network, because it is all done using the computer's familiar web browser. Furthermore, the PT-DW10000E sends an e-mail message to notify the operator when an error has occurred, or a lamp needs to be replaced.

Multi Projector Monitoring & Control Software - Panasonic's original ''Multi Projector Monitoring & Control Software'' freeware allows the user to control and monitor multiple projectors via LAN. When a problem occurs, an alarm message is sent to the controlling/ monitoring PC.

Lamp LED indicator and self-diagnosis function - The projector body is equipped with a temperature alarm LED and a burnt-lamp alarm LED (for lamps 1 to 4). In previous models, the LED indicator was visible only from the front. In the PT-DW10000E the LED is visible from both front and top, so you can see it easily even if the unit is hung from the ceiling. Information on the location of the error is also given in the on-screen display. A self-diagnosis function is also provided. Error codes displayed on the 3-digit, 7-segment LED on the side of the projector tell the operator where the problem is.

High Image Quality/Flexible Installation

Dynamic iris - Incorporating exclusive Panasonic technology, the dynamic iris opens and closes with exceptional speed and precision as the input signal changes, resulting in accurate, real-time control of the light striking the DLP™ chips. The dynamic iris is positioned immediately after the light synthesiser and before the integrator, so it has minimal adverse effect on the overall light uniformity across the screen.

Full 10-bit picture processing - The use of a full 10-bit image processing system provides smooth tonal expression. For example, skin tones appear natural and true to life.

3D colour management system - Compensation provides optimal levels of colour saturation, hue, and brightness that were not possible with conventional projectors. Colours approach those of the original image, even on large-screen displays.

Progressive cinema scan (3/2 pulldown) - This interlace/progressive conversion technology automatically detects when the input signal is derived from filmed material and selects the optimum progressive processing method to assure faithful reproduction of the original image.

Dynamic sharpness control - The dynamic sharpness control circuit adjusts the video signal waveforms based on the difference in brightness of adjacent pixels for a sharp, clear picture that is relatively unaffected by signal noise.

Horizontal/Vertical lens shift - A wide adjustment range for the horizontal/vertical lens shift assures virtually distortion-free images and adds convenience and versatility. Fine adjustment is made within ±60 % from center in the vertical direction and within ±20 % from center in the horizontal direction. (Horizontal: powered, Vertical: powered) *For the ET-D75LE6, the adjustment is within ±50 % in the vertical direction and ±15 % in the horizontal direction.

Optional lenses for various venues - Seven optional lenses with different throw distances are available. These powered zoom/focus lenses enable the projector to perform superbly in an array of projection environments. The lens cover opens in both front and top directions, making it easier to install the lens by viewing the mark on the top of the lens.

Multiple System Appliance

Built-in multi-screen support system
Multi-screen processor
The PT-DW10000E can project large, multi-screen images without any additional equipment. Up to 100 units (10 x 10) can be edge-blended at a time.
Colour matching
When several units are used together, this function corrects for slight variations in the colour reproduction range of individual projectors. The PC software assures easy, accurate control. Independent, 7-axis adjustment (red, green, blue, yellow, magenta, cyan, white) ensures high precision and minimises colour variations.
Edge blending
The edges of adjacent screens can be blended and their luminance controlled. For example, the adjoining edges in a 2x2 multi-screen system can be blended to create a smooth, seamless image.

Multiple terminals including DVI-D and LAN slots - The PT-DW10000E comes equipped with DVI-D and LAN (PJ-Link™) slots. It also features an array of terminals, including two RGB inputs, a 5-BNC connector and D-sub HD 15-pin, serial in/out, S-video input, two remote inputs, and one remote out. In addition to offering DVI-D control, the PT-DW10000E is HDCP (High-Bandwidth Digital Content Protection)-compliant and thus meets a broad range of projection needs.

PT-DW10000E Projector Specifications
DLP™chip Panel size: 0.95" diagonal (16:9 aspect ratio)
  Display method: DLP™ chip x 3 (R, G, B), DLP™ projection system
  Pixels: 2,073,600 (1,920 x 1,080) x 3, total of 6,220,800 pixels
Lamp 250 W UHM™ lamp x 4 (four lamp system)
Brightness*1 10,000 lumens (four-lamp operation mode)
Contrast ratio*1 5,000:1 (full on/full off, in Dynamic iris 3 mode)
Resolution 1,920 x 1,080 pixels
  (1,600 x 1,200 pixels compatible, compression mode)
Lens Optional powered zoom/focus lenses
Screen size 70 - 600 inches, 16:9 aspect ratio
    (70 - 300 inches, 16:9 aspect ratio with the ET-D75LE5)
Lens shift Vertical: ±60% (±50% with the ET-D75LE6) (powered)
    Horizontal: ±20% (±15% with the ET-D75LE6) (powered)
RGB input scanning
frequency
fH 15-100 kHz, fV 24-120 Hz, Dot clock 20-162 MHz
Component signal 480i, 480p, 576i, 576p, 720/60p, 720/50p, 1035/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, 1080/60i, 1080/50i, 1080/50p, 1080/60p
Video signal fH 15.75/15.63 kHz, fV 50/60Hz (NTSC,NTSC4.43,PAL,PAL60,PAL-N,PAL-M,SECAM)
Terminals  
    VIDEO IN BNC x 1, 1.0 Vp-p
    VIDEO OUT BNC x 1, 1.0 Vp-p
    S-VIDEO IN Mini DIN 4-pin x 1
    RGB1/YPBPR IN BNC x 5
    RGB2 IN D-sub HD 15-pin x 1
    DVI-D IN 24-pin x1, DVI 1.0 compliant, HDCP compatible
    SERIAL IN D-sub 9-pin female x 2 (RS232C x 1, RS422 x 1)
    SERIAL OUT D-sub 9-pin male x 1 (RS422 x 1)
    REMOTE 1 IN M3 jack x1 for wired remote control
    REMOTE 1 OUT M3 jack x1 for link control
    REMOTE 2 IN D-sub 9-pin female x 1 for external control (parallel)
    LAN RJ-45 (10 Base-T/100 Base-TX) x 1, compatible with PJLink™
Keystone correction range ±40° (±22° with the ET-D75LE5, ±28° with the ET-D75LE6)
Installation Front/rear, ceiling/floor
Power cord length 3.0 m (9.9'')
Power supply 220-240 V, 15 A, 50 / 60 Hz
Power consumption 1,450 W (25 W in standby mode with fan stopped)
Dimensions (W x H x D) 578 x 320 x 643 mm (22-3/4'' x 12-19/32'' x 25-5/16'') (without lens)
Weight*2 Approx. 32 kg (70.5 lbs) without lens
Operating temperature 0 -45 °C (32 -113 °F) *The highland mode is for use at high altitudes. When using the unit at altitudes of 1,400 to 2,700 meters, the ambient temperature is 0 °C-40 °C.
Operating humidity 10-80% (no condensation)
Supplied accessories Power cord, Wireless/wired remote control unit, Batteries for remote control (3V AA battery x2)

*1: Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*2 Average value. May differ depending on models.

Panasonic Projectors request a call back

Panasonic Projector Call Back Form

First Name(*)
Please let us know your name.

Surname(*)
Invalid Input

Contact Number
Invalid Input

Your Email
Please let us know your email address.

Message
Please let us know your message.

When can we call you back?
Invalid Input

Panasonic Projector Model
Invalid Input